Ali Reza Seifi; Hasan Ahmadi; Magid Peyrovi; Mehri Esfahanian
Abstract
Background and Aim: Due to the high pollutant load of paper mill effluent and in order to decrease contaminants, effluent should be treated before being discharged into the environment.Materials and Methods: After collecting samples of paper mill effluent in Babol city, high levels of COD and TSS were ...
Read More
Background and Aim: Due to the high pollutant load of paper mill effluent and in order to decrease contaminants, effluent should be treated before being discharged into the environment.Materials and Methods: After collecting samples of paper mill effluent in Babol city, high levels of COD and TSS were found. Therefore, polymeric coagulants such as iron sulfate, ferric chloride, polyaluminum chloride, and alum were employed, as well as anionic and cationic polyacrylamide flocculants.Results: Ferrous sulfate, ferric chloride, aluminum polychloride and alum at their optimum pH removed 12%, 13.5%, 15%, and 23% of effluent COD, respectively, as well as 45.5%, 47%, 49% and 52% of TSS. Then, by examining the coagulants concentration effect, alum with an optimal concentration of 1 g/l removed 23.7% COD and 56.4% TSS. Additionally, the effects of anionic and cationic polymeric coagulants were studied. According to the results, using an anionic coagulant at a concentration of 0.004 g / l in combination with the optimal amount of alum resulted in the elimination of 48.6 % COD and 69.6 % TSS.Conclusion: Based on the results, the coagulation and sedimentation methods can be utilized to treat the effluent of paper mills. Furthermore, using an alum coagulant and an anionic coagulant at the same time improves the efficiency of the coagulation and flocculation processes in removing pollutants from paper mill effluent.
HOSEIN ALIDADI; Ali Asghar Najafpoor; somayeh etemadi mashhadi; Batoul Mohebrad; aliakbar dehghan
Abstract
Introduction: Waste leachate contains hazardous organic compounds such as nitrogen compounds and high concentrations of poisonous compounds; the remediation of these pollutants from the environment is considered as a global problem. These pollutants make serious environmental problems through their penetration ...
Read More
Introduction: Waste leachate contains hazardous organic compounds such as nitrogen compounds and high concentrations of poisonous compounds; the remediation of these pollutants from the environment is considered as a global problem. These pollutants make serious environmental problems through their penetration into groundwater and bioaccumulation. Therefore, leachate treatment is essential with suitable and appropriate methods. Anaerobic digestion is considered as one of the most cost-effective methods for this mean. This study aimed to evaluate the efficiency of an anaerobic digester in simultaneous removal of chemical oxygen demand (COD) and TKN from landfill leachate during the process of anaerobic co-digestion for landfill leachate and fresh cow dung. Materials and Methods: In this study, landfill leachate of Mashhad and cow dung was mixed in 3/1, 1/1 and 1/3 ratios. These treatments were exposed under anaerobic digestion with same conditions such as environmental temperature. COD and TKN were measured at the beginning and the end of the process. Results: In the control treatment, COD decreased about 5% and the reduction of TKN was 9.09%. Whilst COD reduction was about 65%, 75%, and 70% in the treatments of 3/1, 1/1 and 1/3 Ratio respectively. Also, TKN decreased 33.26, 82.16 and 84.73% in the 3/1, 1/1 and 1/3 Ratio correspondingly. Conclusion: The results of this study indicated that the applied method is an efficient and economical approach for elimination of COD and TKN from waste leachate. Because it not only is considered as an environmentally friendly method for this regard, but also it will also make economic benefits from methane production.
Mohsen Mehdipoor; Mohammad Hadi Dehghani; Simin Nasseri; Kazem Nadafi; Amir Hossein Mahvi
Abstract
Background and objective: One of the industries producing environmental pollutant is the rubber industry, which has a lot of in environmental dangers. This study was conducted in the purpose of investigation on Ozone and coagulant material’s (Aluminum sulfate –Ferric chloride) efficiency ...
Read More
Background and objective: One of the industries producing environmental pollutant is the rubber industry, which has a lot of in environmental dangers. This study was conducted in the purpose of investigation on Ozone and coagulant material’s (Aluminum sulfate –Ferric chloride) efficiency in waste water treatmentof Rubber Industry. Materials and Method: In this work Rubber industries with the industrial waste volume over 2500 m3 per mount was studied. In order to qualitative evaluation of wastewater in this industry, the reduction of turbidity and the amount of COD were considered as the qualitative criteria. Results: In this study, the reduction rate of COD by chemical treatment with Ferric chloride after ozonation was 34 percent and the wastewater of chemical treatment with aluminum sulfate after ozonation shown 48 percent, the reduction of COD. Conclusion: One of the scientific and practical approaches for the treatment of wastewater in these industries is the use of complex process like chemical coagulation and ozonation along with possible biological processes. Paper type: Research article