@article { author = {Abyareh, Mostafa and Nejadkoorki, Farhad and Ekhtesasi, Mohammad Reza and Akhavan Ghalibaf, Mohammad}, title = {Quantitative and qualitative study of industrial dust fall in Yazd (case study of steel industry in Yazd)}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {123-132}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.37317.1267}, abstract = {Abstract Backound and purpose: The communities have been faced the environmental challenges by dust particles as an important part of air pollution that are emitted into the atmosphere every day by chimney of factories and power plants out. The aim of this study was to determine the quality and quantity of industrial dust around the Yazd Steel Company to control and supervise the industrial dust to make the better environmental condition.   Materials and Methods: In this study, according to the wind direction, the falling dust particles, were collected and weighted in two sediment stations before and after the company from 1/2/2016 to 30/4/2016. The sampling was done by MDCO. Then, the taken samples transferred to an elemental analysis laboratory, and the amounts of dust-forming elements were measured by XRF device. Results. Based on the obtained results, the maximum and minimum levels of the concentrations of falling dust particles were 32.9g/m2 on March for,0.0014 g/m2 on February for SiO2 and SrO respectively. the major elements and chemical compounds of dust included: SiO2، CaO، CO2، Al2O3، MgO، Fe2O3، K2O، Na2O، SO3، TiO2، Cl، p < sub>2O5، MnO، ZnO، Pt، Au، SrO. .   Conclusions: The results of statistical tests demonstrated that there was a significant difference between the amounts of these elements before and after the company. Therefore, proper management and more accurate monitoring are necessary to protect the environment in this industry}, keywords = {Dust,MDCO,Steel Plant,Yazd}, title_fa = {بررسی کمی و کیفی غبار ریزشی حاصل از صنایع در شهر یزد (مطالعه موردی صنایع فولاد در یزد)}, abstract_fa = {  زمینه و هدف: بخش مهمی از آلودگی­های هوا ناشی از ذرات معلق، گرد‌و‌غبار و ریزگرد­هاست که روزانه توسط دودکش کارخانه­ها و نیروگاه­ها در محیط اطراف رها می­گردند و جوامع را با چالش زیست­محیطی مهمی روبه‌رو می‌سازند. مطالعه حاضر با هدف تعیین کمی و کیفی غبار صنعتی عرصه اطراف شرکت فولاد یزد برای کنترل و نظارت بهتر بر روی غبار تولیدی این کارخانه در جهت بهبود وضعیت محیط­زیست انجام شد. مواد و روش­ها: در این مطالعه، مقادیر عناصر و ترکیبات شیمیایی غبار ریزشی در سه ماه بهمن و اسفند 1394 و فروردین 1395 در دو ایستگاه رسوب­سنجی قبل و دو ایستگاه رسوب­سنجی بعد کارخانه با توجه به جهت باد جمع‌آوری و اندازه­گیری شد. نمونه­گیری با استفاده از دستگاه رسوب­گیر تیله­ای انجام شد. سپس نمونه­ها به آزمایشگاه تجزیه عنصری منتقل و میزان عناصر و ترکیبات شیمیایی تشکیل­دهنده غبار توسط دستگاهفلورسانس اشعه ایکس اندازه­گیری شد. یافته­ها: بر اساس نتایج حاصل از تجزیه و تحلیل شیمیایی غبار ریزشی کارخانه فولاد، بیشترین مقدار مربوط به SiO2(اکسید سیلیسیم)، 32/9 گرم بر متر مربع در اسفند ماه و کمترین مقدار مربوط به SrO(اکسید استرانسیوم)،0/0014 گرم بر متر مربع در بهمن ماه بود و نسبت تقریبی فراوانی عناصر و ترکیبات شیمیایی عمده در گردوغبار به‌صورت: SiO2، CaO، CO2، Al2O3، MgO، Fe2O3، K2O، Na2O، SO3، TiO2، Cl، p 2O5، MnO، ZnO، Pt، Au، SrO بود. نتیجه­گیری: بین میزان این عناصر و ترکیبات شیمیایی در ایستگاه­های قبل و بعد کارخانه اختلاف معناداری وجود دارد، لذا انجام اقدامات مدیریتی و پایش دقیق­تر جهت حفاظت از محیط­زیست در صنعت مذکور الزامی است. نوع مقاله: پژوهشی}, keywords_fa = {غبار,تله رسوب گیر تیله ای,صنعت فولاد,یزد}, url = {https://jreh.mums.ac.ir/article_13940.html}, eprint = {https://jreh.mums.ac.ir/article_13940_8a3878de9fdb3abef7cbc9ce409e2669.pdf} }