@article { author = {Golbabei Kootenaei, Farshad and Mehrdadi, Nasser and Nabi Bidhendi, Gholamreza and Aminirad, Hasan and Asadi Ghalhari, Mahdi and Saeedi, Farima}, title = {Investigating the effect of ultrasonic waves on coagulants in dewatering of excess sludge of south of Tehran}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {99-107}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.39766.1303}, abstract = {Abstract Background and purpose: Reducing the amount of sludge produced by the biological treatment of active sludge is of great importance. The main task of dewatering unit is to separate water from excess sludge. The aim of this study is to determine the effect of ultrasonic waves on coagulants in improving the sludge dewatering process and increasing solid content of sludge cake. Materials and methods:This is an experimental study performed in batch laboratory scale. During the two seasons, 12 samples were taken at 15 days’ intervals. Variables include ultrasound density (0.375, 0.75, 1, 1.3 and 2.5) in watts per ml, Time (1, 5, 10, 15 and 30) in minute, and specific energy input (208, 1041, 2083, 3124 and 6249) in kilojoule on kilo total suspended solids. The effects of ultrasonic waves on coagulants were investigated by using Particle Size Analizer (PSA). Results:The optimum amount of solid content of sludge and capillary suction time (CST) was equal to 26.4 percent and 86 seconds in sonification time of 5 minutes and specific energy input of 1041 kj/kg TS. By applying ultrasonic waves, d10, d50, d90 and average particle size amount were equal to 6.3, 44.2, 24.4 and 28.84 micrometers respectively. Conclusion:Ultrasound waves create pores in the physical structure of the polymers and the increase of cationic surface charge increases the adsorption of particles and made larger flocs and can increase the solid content of sludge and improve sludge dewatering process.}, keywords = {Coagulant,Dewatering,Excess sludge,Solid content of sludge,Ultrasonic Waves}, title_fa = {بررسی تاثیر امواج اولتراسونیک بر مواد منعقدکننده در آبگیری لجن مازاد تصفیه‌خانه جنوب تهران}, abstract_fa = {زمینه و هدف: کاهش حجم لجن تولیدی تصفیه بیولوژیکی به روش لجن فعال، از اهمیت بالایی برخوردار است. واحد آبگیری، وظیفه جداسازی آب مازاد از لجن را به عهده دارد. مطالعه حاضر با هدف بررسی اثر سیستم انتشار امواج اولتراسونیک بر مواد منعقد کننده در فرآیند آبگیری و افزایش جامدات کیک لجن انجام شد.   مواد و روش‌ها: این مطالعه تجربی به‌صورت ناپیوسته و در مقیاس آزمایشگاهی انجام شد. در طی 2 فصل، تعداد 12 نمونه با فاصله زمانی 15 روزه از تصفیه‌خانه برداشت گردید. متغیرهای تحقیقات شامل: چگالی اولتراسوند (0/375، 0/75، 1، 1/3 و 2/5) بر حسب وات بر میلی‌لیتر، زمان (1، 5، 10، 15 و 30) بر حسب دقیقه و انرژی ورودی ویژه (208، 1041، 2083، 3124 و 6249) بر حسب کیلوژول بر کیلوگرم جامدات معلق بود. تأثیر امواج اولتراسونیک با استفاده از دستگاه سنجش اندازه ذرات بر روی مواد منعقد کننده مورد مطالعه قرار گرفت.   یافته‌ها: میزان بهینه جامدات کیک لجن و زمان مکش موئینه برابر 26/4% و 86 ثانیه برای شرایط راهبری زمان و انرژی ورودی ویژه برابر 5 دقیقه و 1041 کیلوژول بر کیلوگرم جامدات معلق به‌دست آمد. میزان d10، d50، d90 و متوسط اندازه ذرات با اعمال امواج اولتراسونیک به ترتیب برابر 6/3، 44/2، 24/4 و 28/84 میکرومتر بود. نتیجه‌گیری: امواج اولتراسوند موجب ایجاد خلل و فرج در ساختار فیزیکی پلیمرها شده و با افزایش بارِ سطحی کاتیونی، موجب افزایش میزان جذب ذرات و بزرگ‌تر شدن لخته‌ها و سبب افزایش میزان جامدات کیک لجن و در نتیجه افزایش آبگیری می‌گردد. نوع مقاله: پژوهشی}, keywords_fa = {امواج اولتراسونیک,آبگیری,جامدات کیک لجن,لجن مازاد,منعقدکننده}, url = {https://jreh.mums.ac.ir/article_13944.html}, eprint = {https://jreh.mums.ac.ir/article_13944_c47da9eb71f45e1a0fda3db9f2e6c9a8.pdf} } @article { author = {Sayadi, Maryam and G.Mahmoodlu, Mojtaba}, title = {Investigation and prediction of quality parameters of Gamasyab river using multivariate method of Canonical correlation analysis and time series}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {108-122}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.39402.1291}, abstract = {Background and purpose: The present study was performed to investigate trend and prediction of changes in some quality parameters of Gamasyab river water using multivariate statistical methods and time series.   Materials and methods: In this research, the annual means of some qualitative parameters related to a 6-year statistical period in two Pol-Chehr and DoAb stations were used. At first, the factors controlling chemistry of Gamasyab river were determined using Ternary and Gibbs diagrams. Then, to determine a linear relationship between multidimensional variables, Canonical correlation coefficients were used. Finally, the changing trend of water quality parameters in next 5-years was predicted.   Results: At Pol-Chehr station, qualitative parameters show an upward trend except for pH. While at DoAb, all qualitative parameters show a downward trend except for Mg and SO4. Based on Ternary and Gibbs diagrams, water dominant facies are Ca-Mg-HCO3 and the main factor controlling water chemistry is water-rock reaction at both stations, respectively. Results showed that the chemical parameters of HCO3 and Mg at Pol-Chehr with canonical coefficients of 0.938 and 0.933 are in the first group and Na with coefficient of 0.845 is situated in the second category. While in DoAb station, chemical variables HCO3 and Ca with coefficients of 0.945 and 0.0789 are placed in the first group, and Na and Cl with the coefficients of 0.930 and 0.800 are in the second group, respectively. First and second group origins of canonical variables can be related to dissolution of limestone and evaporative deposits. Prediction results of the water quality parameters changes in Gamasyab river for the next 5 years showed that an increase in all the parameters except for pH at Pol-Chehr station. While except for Mg and SO4, all quality parameters will decrease at the DoAb station. Conclusion:Water-rock reaction is the most important factor affecting Gamasyab river water chemistry.   Document Type: Research article}, keywords = {Surface water,quality parameters,WHO,Canonical correlation}, title_fa = {بررسی و پیش‌بینی پارامترهای کیفی رودخانه گاماسیاب با استفاده از روش چند متغیره تحلیل همبستگی کانونیک و سری‌های زمانی}, abstract_fa = {زمینه و هدف: یکی از مسائل مهم در مدیریت کیفی منابع آب، یـافتن رابطـه بـین پـارامترهـای مختلـف فیزیکی و شیمیایی تأثیرگذار بر کیفیت پیکره‌های آبی است. پاسـخ به این مسئله، گامی ضروری و مهم جهـت بررسـی دقیـق‌تـر منـابع آلاینده و ارائه راهکار جهت کـاهش اثـرات منفـی آن و در نهایـت بهبود وضـعیت کیفـی منـابع آب مـی‌باشـد. پژوهش حاضر با هدف بررسی روند و پیش‌بینی تغییرات برخی از پارامترهای کیفی آب رودخانه گاماسیاب با استفاده ازروش‌های آماری چندمتغیره و سری‌های زمانی انجام شد. مواد و روش‌ها: در این تحقیق از میانگین سالانه برخی پارامترهای کیفی مربوط به یک دوره آماری 6 ساله در دو ایستگاه پل‌چهر و دوآباستفاده شد. ابتدا عوامل کنترل‌کننده شیمی آب رودخانه گاماسیاب با استفاده از دیاگرام مثلثی و نمودار گیس تعیین شد، سپس جهت تعیین ارتباط خطی بین متغیرهای چندبعدی، از ضرایب همبستگی کانونیکال استفاده شد. در نهایت روند تغییرات پارامترهای کیفی آب در 5 سال آینده پیش‌بینی شد. یافته‌ها: در ایستگاه پل‌چهر، به‌جز پارامتر pH، سایر پارامترهای کیفی دارای روند افزایشی بودند، در حالی‌که در ایستگاه دو‌آب، تمامی پارامترهای کیفی به‌جز منیزیم و سولفات روند کاهشی داشتند. بر اساس دیاگرام‌های مثلثی و گیبس به‌ترتیب رخساره غالب آب در هر دو ایستگاه کلیم-منیزیم-بی‌کربنات و عامل اصلی کنترل کننده شیمی آب واکنش آب- سنگ بود. بر اساس نتایج، پارامترهای شیمیایی بی‌کربنات و منیزیم در ایستگاه پل‌چهر با ضرایب کانونی 0/983 و 0/933 در دسته اول متغیرهای کانونیک و سدیم با ضریب0/845 در دسته دوم متغیرهای کانونیک قرار گرفتند، در حالی‌که در ایستگاه دوآب متغیرهای شیمیایی بی‌کربنات و کلسیم با ضرایب کانونی 0/945 و 0/789در دسته اول کانونیک و سدیم و کلراید با ضرایب 0/930 و 0/800 در دسته دوم متغیرهای کانونیک قرار داشتند. منشأ دسته اول و دوم متغیرهای کانونیک را می‌توان به‌ترتیب به انحلال سنگ‌های آهکی و تبخیری مربوط دانست. نتایج پیش‌بینی روند تغییرات پارامترهای کیفی آب رودخانه گاماسیاب طی 5 سال آینده نشان داد که در ایستگاه پل‌چهر تمام پارامترها به‌جز pH روند افزایشی و در ایستگاه دوآب به‌جز منیزیم و سولفات، سایر پارامترهای کیفی روند کاهشی خواهند داشت. نتیجه‌گیری: واکنش آب- سنگ، مهم‌ترین عامل کنترل کننده شیمی آب در رودخانه گاماسیاب می‌باشد. نوع مقاله: پژوهشی}, keywords_fa = {آب سطحی,استاندارد WHO,پارامترهای کیفی,همبستگی کانونیک}, url = {https://jreh.mums.ac.ir/article_13943.html}, eprint = {https://jreh.mums.ac.ir/article_13943_48c7fb529d6888ccb5ca1c6952b50242.pdf} } @article { author = {Abyareh, Mostafa and Nejadkoorki, Farhad and Ekhtesasi, Mohammad Reza and Akhavan Ghalibaf, Mohammad}, title = {Quantitative and qualitative study of industrial dust fall in Yazd (case study of steel industry in Yazd)}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {123-132}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.37317.1267}, abstract = {Abstract Backound and purpose: The communities have been faced the environmental challenges by dust particles as an important part of air pollution that are emitted into the atmosphere every day by chimney of factories and power plants out. The aim of this study was to determine the quality and quantity of industrial dust around the Yazd Steel Company to control and supervise the industrial dust to make the better environmental condition.   Materials and Methods: In this study, according to the wind direction, the falling dust particles, were collected and weighted in two sediment stations before and after the company from 1/2/2016 to 30/4/2016. The sampling was done by MDCO. Then, the taken samples transferred to an elemental analysis laboratory, and the amounts of dust-forming elements were measured by XRF device. Results. Based on the obtained results, the maximum and minimum levels of the concentrations of falling dust particles were 32.9g/m2 on March for,0.0014 g/m2 on February for SiO2 and SrO respectively. the major elements and chemical compounds of dust included: SiO2، CaO، CO2، Al2O3، MgO، Fe2O3، K2O، Na2O، SO3، TiO2، Cl، p < sub>2O5، MnO، ZnO، Pt، Au، SrO. .   Conclusions: The results of statistical tests demonstrated that there was a significant difference between the amounts of these elements before and after the company. Therefore, proper management and more accurate monitoring are necessary to protect the environment in this industry}, keywords = {Dust,MDCO,Steel Plant,Yazd}, title_fa = {بررسی کمی و کیفی غبار ریزشی حاصل از صنایع در شهر یزد (مطالعه موردی صنایع فولاد در یزد)}, abstract_fa = {  زمینه و هدف: بخش مهمی از آلودگی­های هوا ناشی از ذرات معلق، گرد‌و‌غبار و ریزگرد­هاست که روزانه توسط دودکش کارخانه­ها و نیروگاه­ها در محیط اطراف رها می­گردند و جوامع را با چالش زیست­محیطی مهمی روبه‌رو می‌سازند. مطالعه حاضر با هدف تعیین کمی و کیفی غبار صنعتی عرصه اطراف شرکت فولاد یزد برای کنترل و نظارت بهتر بر روی غبار تولیدی این کارخانه در جهت بهبود وضعیت محیط­زیست انجام شد. مواد و روش­ها: در این مطالعه، مقادیر عناصر و ترکیبات شیمیایی غبار ریزشی در سه ماه بهمن و اسفند 1394 و فروردین 1395 در دو ایستگاه رسوب­سنجی قبل و دو ایستگاه رسوب­سنجی بعد کارخانه با توجه به جهت باد جمع‌آوری و اندازه­گیری شد. نمونه­گیری با استفاده از دستگاه رسوب­گیر تیله­ای انجام شد. سپس نمونه­ها به آزمایشگاه تجزیه عنصری منتقل و میزان عناصر و ترکیبات شیمیایی تشکیل­دهنده غبار توسط دستگاهفلورسانس اشعه ایکس اندازه­گیری شد. یافته­ها: بر اساس نتایج حاصل از تجزیه و تحلیل شیمیایی غبار ریزشی کارخانه فولاد، بیشترین مقدار مربوط به SiO2(اکسید سیلیسیم)، 32/9 گرم بر متر مربع در اسفند ماه و کمترین مقدار مربوط به SrO(اکسید استرانسیوم)،0/0014 گرم بر متر مربع در بهمن ماه بود و نسبت تقریبی فراوانی عناصر و ترکیبات شیمیایی عمده در گردوغبار به‌صورت: SiO2، CaO، CO2، Al2O3، MgO، Fe2O3، K2O، Na2O، SO3، TiO2، Cl، p 2O5، MnO، ZnO، Pt، Au، SrO بود. نتیجه­گیری: بین میزان این عناصر و ترکیبات شیمیایی در ایستگاه­های قبل و بعد کارخانه اختلاف معناداری وجود دارد، لذا انجام اقدامات مدیریتی و پایش دقیق­تر جهت حفاظت از محیط­زیست در صنعت مذکور الزامی است. نوع مقاله: پژوهشی}, keywords_fa = {غبار,تله رسوب گیر تیله ای,صنعت فولاد,یزد}, url = {https://jreh.mums.ac.ir/article_13940.html}, eprint = {https://jreh.mums.ac.ir/article_13940_8a3878de9fdb3abef7cbc9ce409e2669.pdf} } @article { author = {Komasi, Mehdi and Beiranvand, Behrang}, title = {Environmental Impact Assessment of the Eyvashan Dam using the Leopold modified matrix and Rapid Impact Assessment Matrix (RIAM)}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {133-143}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.40232.1302}, abstract = {Abstract Background and Aim: Major Dam construction projects have increased due to widespread climate change, as a result of increased drought, human population growth and, consequently, increased global demand for energy and water. However, without comprehensive research, a large project such as a dam will have many irreversible and unpredictable effects on the environment. In this paper, the environmental impacts of Eyvashan dam in two phases of construction and exploitation on biological, physical-chemical, economic-social, cultural and strategic environments have been identified and studied. Materials and Methods: In the study of the environmental impact assessment of the Eyvashan dam with regard to development and evolution, as well as the abundant use of matrices in construction projects, the modified Leopold matrix method and the rapid impact assessment matrix have been used. The field survey and questionnaire were used to evaluate the construction and operation activities on the environmental components. Results: The results showed that the most negative effects in both construction and utilization phases were in both Leopold modified matrix and the rapid impact assessment matrix related to the physical-chemical environment and the most positive effects of the socio-economic environment for both phases. Conclusion: By comparing the many positive effects of construction and exploitation of the dam in terms of socio-economic status, the construction of the dam can be considered as an appropriate alternative to the physical-chemical negative effects. Also, in the results of both matrices, there was a very suitable adaptation matrix that can confirm the accuracy of the results in the environmental assessment of the Eyvashan dam in two stages of construction and operation.  }, keywords = {Eyvashan,Leopold,RIAM,Construction,Operation}, title_fa = {ارزیابی اثرات زیست محیطی سد ایوشان با استفاده از روش ماتریس لئوپولد و ماتریس ارزیابی سریع}, abstract_fa = {زمینه و هدف: با توجه به مواردی همچون تغییر اقلیم گسترده و در نتیجه افزایش خشکسالی، رشد جمعیت انسانی و به‌تبع آن افزایش تقاضای جهانی برای انرژی و آب، پروژه‌های بزرگ سدسازی افزایش یافته است. با این وجود بدون تحقیقات جامع، یک پروژه بزرگ مانند سد، اثرات برگشت‌ناپذیر و پیش‎بینی نشده زیادی را روی محیط زیست خواهد گذاشت. مطالعه حاضر با هدف ارزیابی اثرات زیست‌محیطی سد ایوشان در دو فاز ساختمانی و بهره‎برداری بر محیط‎های بیولوژیکی، فیزیکی- شیمیایی، اقتصادی- اجتماعی، فرهنگی و استراتژیکی انجام شد. مواد و روش‌ها: در مطالعه ارزیابی اثرات زیست‌محیطی سد ایوشان با توجه به توسعه و تکامل و همچنین کاربرد فراوان ماتریس‌ها در پروژه‌های عمرانی، از روش ماتریس لئوپولد اصلاح شده و ماتریس ارزیابی اثرات سریع استفاده شد. جهت ارزیابی فعالیت‌های مرحله ساختمانی و بهره‌برداری بر روی اجزای محیط زیستی هر یک از گزینه‌ها، از روش بازدید میدانی و پرسشنامه استفاده شد. یافته‌ها: بر اساس نتایج، بیشترین اثرات و پیامدهای منفی در فازهای ساختمانی و بهره‎برداری برای هر دو ماتریس لئوپولد اصلاح شده و ماتریس ارزیابی اثرات سریع مربوط به محیط فیزیکی- شیمیایی و بیشترین اثرات مثبت مربوط به محیط اقتصادی- اجتماعی برای هر دو فاز بود. نتیجه‌گیری: با مقایسه آثار مثبت فراوان ساخت و بهره‌برداری سد از نظر اقتصادی - اجتماعی نسبت به آثار منفی فیزیکی- شیمیایی، می‌توان گزینه ساخت سد را گزینه‌ای مناسب محسوب نمود. همچنین در نتایج هر دو ماتریس تطابق بسیار مناسبی به‌دست آمد که می‌تواند صحت نتایج را در ارزیابی زیست محیطی سد ایوشان در دو مرحله ساختمانی و بهره‌برداری تأیید نماید. نوع مقاله: پژوهشی}, keywords_fa = {سد ایوشان,ماتریس لئوپولد,ماتریس ارزیابی اثرات سریع,فاز ساختمانی,فاز بهره‎برداری}, url = {https://jreh.mums.ac.ir/article_13945.html}, eprint = {https://jreh.mums.ac.ir/article_13945_f7cbc48cdf8550118ee0a7c2ea3a6a76.pdf} } @article { author = {Taheri Otaghsara, Sayede Samane and Zazouli, Mohammad Ali and Ebrahimzade, Mohammad Ali and Eslami, Shahram and Esfandiari, Yahya}, title = {Study on Performance of Walnut Shells Adsorbent in Nitrate Removal from the Aqueous Solutions}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {144-153}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.37825.1274}, abstract = {Background and purpose: High concentration of nitrate in drinking water can be detrimental to health. It can be reduced to nitrite in children Stomach and lead the methemoglobinemia. Therefore, the removal of nitrate from polluted water is necessary. The purpose of this study is to determine the effectiveness of walnut shell adsorbent in removing nitrates from aqueous solutions. Materials and methods: This experimental study was conducted in a batch laboratory scale. The walnut shell were collected and burned in the furnace at 700 סC in 1 hours and sieved in 20 -100 mesh. The optimum values of pH, contact time, adsorbent dosage and and the different concentrations of nitrate were experimented in lab scale conditions were determined. The nitrate concentration was measured in wavelength of 220 and 275 nm by spectrophotometer. Also pHpzc of absorbent have been evaluated. Results: The results showed that optimum pH was 9 so that by increasing and decreasing optimum pH, removal efficiency increase and decrease. The removal efficiency Increased until 120 minutes, but after 120 minutes the percentage of removal was reduced Increasing of adsorbent dosage and the different concentrations of nitrate cause the increase and decrease of adsorbtion respectively. At optimal conditions, nitrate removal efficiency was 78% Conclusion: The result of the present study shows that walnut shell can be used as an effective and cheap adsorbent for nitrate removal and the process is more efficient at Alkaline pH .}, keywords = {Nitrate,walnut shell ash,adsorption,Absorbent}, title_fa = {بررسی کارایی جاذب پوست سخت گردو در حذف نیترات‌ از محلول‌های آبی}, abstract_fa = {مقدمه: غلظت بالای نیترات در آب آشامیدنی برای سلامت مضر است بطوریکه در معده کودکان نیترات به نیتریت احیا شده و بیماری متهموگلوبینما را سبب می‌گردد. بنابراین حذف نیترات آبهای آلوده ضرورت دارد. هدف از این مطالعه تعیین کارایی جاذب پوست سخت گردو در حذف نیترات از محلولهای آبی است. مواد و روش‌ها: مطالعه بنیادی – کاربردی حاضر در مقیاس آزمایشگاهی و به صورت ناپیوسته انجام گرفته است. ابتدا پوست سخت گردو جمع‌آوری شده و در کوره در دمای 700 درجه سانتیگراد به مدت یک ساعت سوزانده شد. جادب حاصل پس از خرد نمودن در هاون، با الک 20 و 100 مش دانه‌بندی گردید. تاثیر pH ، زمان تماس، دوز جاذب و غلظت اولیه نیترات بر عملکردجذب مورد بررسی قرار گرفت. غلظت نیترات در طول موج‌های 220 و 275 نانومتر توسط دستگاه اسپکتوفتومتر UV به روش استاندارد متد اندازه‌گیری شد. pHPZC جاذب نیز اندازه‌گیری شد. یافته‌ها: نتایج این مطالعه نشان داد که pH بهینه 9 می‌باشد بطوریکه در pH بالاتر و پائین‌تر از بهینه به ترتیب درصد حذف افزایش و کاهش می‌یابد. راندمان حذف تا زمان تماس تا 120 دقیقه افزایش ولی بعد از 120 دقیقه درصد حذف کاهش یافت. افزایش دوز جاذب و غلظت اولیه‌ی آلاینده به ترتیب سبب افزایش و کاهش راندمان جذب ‌گردید. در شرایط بهینه راندمان حذف نیترات 78 درصد بود. نتیجه‌گیری: مطالعه حاضر نشان داد که جادب پوست سخت گردو می‌تواند به عنوان یک جاذب ارزان و موثر جهت حذف نیترات مورد استفاده قرار گیرد. فرآیند حذف در محیط قلیایی موثرتر است.}, keywords_fa = {نیترات,نیتریت,خاکستر پوست گردو,جذب سطحی,جاذب}, url = {https://jreh.mums.ac.ir/article_13942.html}, eprint = {https://jreh.mums.ac.ir/article_13942_2a9c41d1cc1b3ca6fb76428becd04425.pdf} } @article { author = {Jafari, Fatemeh and Motevali Haghi, Farzad and Eslamifar, Masoumeh and Fazeli Dinan, Mahmoud and Jafari, Ali}, title = {Determination of bacterial contamination of flies (Musca Domestica) in different environments at Joybar city}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {154-161}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.37673.1271}, abstract = {Abstract Background and Aim: House flies are able to transmit pathogenic organisms from infected materials to human. The role of the flies in the transmission of many diseases has been demonstrated. This study was conducted to determine the bacterial contamination of M.domestica flies in various sources of Joybar city.   Materials and Methods: A total of 384 household flies were collected from five sources including urban and rural solid wastes, hospital campus, coastal areas and slaughterhouses. Samples were transferred to the microbiology laboratory of the school of public health in some sterilized glass containers, and standard tests were carried out to isolate and identify bacterial species.   Results: Escherichia coli was the dominant species in the samples. From all of the samples, 46% E.coli, 19% Staphylococcus aureus, 9.98% Staphylococcus epidermidis and 16.66% Enterobacter Aerogenus were isolated.   Conclusion: The results of this study confirmed that the presence of these insects in the public places and different parts of the environment is regarded as a disturbing agent, and vector of pathogens. Since public spaces should not be a source of contamination,  the implementation of the sanitation programs and control of these insects seems to be so necessary to create a safe and healthy environment.}, keywords = {Musca Domestica,Bacterial contamination,sanitation,Joybar}, title_fa = {تعیین آلودگی باکتریایی مگس خانگی (Musca Domestica) درمحیط های مختلف شهرستان جویبار}, abstract_fa = {چکیده زمینه و هدف: مگس خانگی قادر به انتقال ارگانیسم‌های بیماری‌زا از مواد آلوده به انسان هستند. نقش مگس در انتقال بسیاری از بیماری‌ها به اثبات رسیده است. مطالعه حاضر با هدف تعیین میزان آلودگی باکتریایی مگس‌های خانگی موسکا دومستیکا در منابع مختلف شهرستان جویبار انجام شد. مواد و روش‌ها: از 5 منبع شامل زباله‌های شهری و روستایی، محوطه بیمارستانی، مناطق ساحلی و کشتارگاه‌ها در مجموع 384 عدد مگس خانگی جمع‌آوری گردید. نمونه­ها پس از انتقال به داخل ظروف شیشه‌ای استریل، به آزمایشگاه میکروبیولوژی دانشکده بهداشت منتقل‌ شده و آزمایشات استاندارد، جهت جداسازی و شناسایی گونه­های باکتریایی انجام شد. یافته‌ها: اشرشیاکلی گونه غالب در نمونه­ها بود. از کل نمونه‌های مناطق 46% آلوده به ایکلای، 19% آلوده به استافیلوکوکوس اورئوس، 9/98% نمونه‌ها آلوده به استافیلو کوکوس اپیدرمیدیس و16/66% نمونه‌ها آلوده به انتروباکتر آئروژنز بودند. نتیجه‌گیری: نتایج این مطالعه، وجود این حشرات در مراکز عمومی را به‌عنوان عامل مزاحم و ناقل عوامل بیماری‌زا تأیید می­نماید. با توجه به اینکه مکان‌های عمومی و بخش­های مختلف محیط، نباید محل ایجاد و انتشار عفونت و آلودگی باشند، لذا بهسازی و انجام اقدامات مهندسی بهداشت و کنترل این حشرات به منظور تأمین اهداف اساسی سلامت و ایجاد محیطی سالم و بی‌خطر، ضروری به‌نظر می­رسد. نوع مقاله: پژوهشی}, keywords_fa = {مگس خانگی,آلودگی باکتریایی,بهسازی,جویبار}, url = {https://jreh.mums.ac.ir/article_13941.html}, eprint = {https://jreh.mums.ac.ir/article_13941_d0722d24e127bbfd1ce7d7581f06bc21.pdf} } @article { author = {Shamsoddin Dayani Tilaki, Mohammad and Alidadi, Hossein and Taghipour, Ali and Yazdani, Mohsen and Choupani, Ali and Navaei, Ali Asghar}, title = {Evaluation of noise pressure level at mosques at the time of religious ceremonies}, journal = {Journal of Research in Environmental Health}, volume = {5}, number = {2}, pages = {162-169}, year = {2019}, publisher = {Mashhad University of Medical Sciences}, issn = {2423-5202}, eissn = {2423-5202}, doi = {10.22038/jreh.2019.40315.1314}, abstract = {  Background: The use of new technologies has positive and negative effects on human society. Loudspeakers and sound systems can also make harm to humans and noise pollution. Shiite religious ceremonies have special religious occasions in addition to the five prayers and religious lectures. The high performance of audio systems in mourning applications requires proper use of this technology. The purpose of this study was to determine the sound pressure level in religious centers and on various religious occasions in mosques and chapels of Mashhad University of Medical Sciences. Material and methods: In this descriptive-analytical study, the sound pressure level was surveyed in all active mosques and chapels at Mashhad University of Medical Sciences in 2016. To determine the sound pressure level distribution, TES 1358 was used to measure the noise level. Conclusions:The mean sound pressure levels in the endowment, lecture, and mourning ceremonies were 87.14, 90.31 and 93.91 dB respectively. Comparison of the sound pressure level in the A-weighting network in a  mourning ceremony with the US Environmental Protection Agency and the World Health Organization standards showed a significant difference (P-value = 0.013). Discussion:Since the average time for holding religious ceremonies and celebrations is up to 2 hours, the audio players and design of the interiors should be adjusted to a maximum sound pressure level of 80 dB. Keywords:Sound Pressure Level, Mosques, Religious Ceremonies, University of Medical Sciences}, keywords = {"Noise pollution"," spl"," mosques"," ceremonies"}, title_fa = {بررسی تراز فشار صوت مراسمات مذهبی در مساجد و نمازخانه های دانشگاه علوم پزشکی مشهد}, abstract_fa = {زمینه و هدف: استفاده از تکنولوژی­های نوین، آثار مثبت و منفی بر جامعه بشری دارد. بلندگوها و سیستم­های صوتی، زیان­هایی برای بشر داشته و آلودگی صوتی ایجاد می­نمایند. شیعیان در مراسم دینی افزون بر نمازهای پنج‌گانه و سخنرانی مذهبی، مناسبت­های ویژه‌ای مذهبی نیز دارند. کارایی بالای سیستم­های صوتی در برنامه­های عزاداری، نیازمند استفاده صحیح از این تکنولوژی می­باشد. مطالعه حاضر با هدف تعیین تراز فشار صوتی در مراکز مذهبی و در مناسبت­های مختلف مذهبی در مساجد و نمازخانه­های دانشگاه علوم پزشکی مشهد انجام شد. مواد و روش‌ها: در این مطالعه توصیفی- تحلیلی، به‌صورت سرشماری تمام مساجد و نمازخانه­های فعال در دانشگاه علوم پزشکی مشهد در سال 1396 مورد پایش قرار گرفت. به‌منظور تعیین توزیع تراز فشار صوتی از روش شبکه‌بندی و جهت اندازه‌گیری نیز از دستگاه TES 1358 استفاده گردید. یافته‌ها: میانگین تراز فشار صوتی در مراسمات روضه، سخنرانی و سینه‌زنی به‌ترتیب 87/14، 90/31 و 93/31 دسی‌بل در شبکه توزین فرکانسی c تعیین گردید. مقایسه تراز فشار صوتی در شبکه توزین فرکانسی A در مراسم سینه‌زنی با استاندارد سازمان حفاظت محیط زیست آمریکا و سازمان بهداشت جهانی اختلاف معنی‌داری را نشان داد (0/013=p). نتیجه‌گیری: مراسم مذهبی و اعیاد به‌طور متوسط تا 2 ساعت به‌طول می­انجامند، بنابراین طراحی فضای داخلی و پخش‌کننده­های صوتی باید به‌گونه‌ای تنظیم شوند که حداکثر تراز فشار صوتی آن 80 دسی‌بل باشد. نوع مقاله: پژوهشی}, keywords_fa = {"آلودگی صوتی","تراز فشار صوتی"," مساجد"," مراسم مذهبی"}, url = {https://jreh.mums.ac.ir/article_13946.html}, eprint = {https://jreh.mums.ac.ir/article_13946_ff7590b82e66932c300569976c4756f0.pdf} }